China Temperature Resistance Heat Shrink Tubing manufacturer, supplier, exporter and factory
. Established in year of 2005, Changyuan Electronics(Shenzhen) Co., Ltd. is experienced in Temperature Resistance Heat Shrink Tubing manufacturing. During all these years, we've been focusing on R&D and Temperature Resistance Heat Shrink Tubing technology development and have built up a long-term partnership with our clients.
Model: CB-HRT
Products description:
CB-HRT Temperature Resistance Heat Shrink Tubing is a heat-resistant, polyolefin heat-shrinkable tubing which is flexible, and resistant to common fluids and solvents. This tubing can be used for electrical insulation and strain relief of components that are exposed to high temperature.
Specifications
Item | Specifications | |
Shrink Temperature (℃) | 120 | |
Operating Temperature Range(℃) | 150 | |
Radial Shrinking Ratio (%) | ≥50 | |
Longitudinal Change (%) | ≤5 | |
Tensile Strength (Mpa) | ≥10.4 | |
Elongation at break (%) | ≥200 | |
Aging in Circulating-air Oven | 180.0±1.0℃, 168hrs | |
After aging | Tensile Strength (Mpa) | ≥7.3 |
Ultimate Elongation (%) | ≥100 | |
Concentricity (%) | ≥65 | |
Volume Resistance (Ω cm) | ≥1014 | |
Dielectric Strength (KV/mm) | ≥15 | |
Water Absorption (%) | <0.4 | |
Copper Corrosion | No corrosion | |
Size
Size | As Supplied (mm) | After Recovery (mm) | ||
Inside Diameter | Wall-thickness | Inside Diameter | Wall-thickness | |
φ1.0 | 1.5±0.2 | 0.18±0.05 | ≤0.6 | 0.30±0.05 |
φ1.5 | 2.0±0.2 | 0.18±0.05 | ≤0.8 | 0.32±0.05 |
φ2.0 | 2.5±0.2 | 0.18±0.05 | ≤1.00 | 0.35±0.05 |
φ2.5 | 3.0±0.2 | 0.20±0.05 | ≤1.25 | 0.38±0.05 |
φ3.0 | 3.5±0.3 | 0.20±0.05 | ≤1.5 | 0.38±0.05 |
φ3.5 | 4.0±0.3 | 0.20±0.05 | ≤1.75 | 0.38±0.05 |
φ4.0 | 4.5±0.3 | 0.23±0.05 | ≤2.0 | 0.45±0.05 |
φ4.5 | 4.8±0.3 | 0.23±0.05 | ≤2.25 | 0.45±0.05 |
φ5.0 | 5.5±0.3 | 0.23±0.05 | ≤2.5 | 0.45±0.05 |
φ6.0 | 6.5±0.4 | 0.25±0.05 | ≤3.0 | 0.50±0.05 |
φ6.5 | 7.0±0.4 | 0.25±0.05 | ≤3.0 | 0.52±0.05 |
φ7.0 | 7.5±0.4 | 0.30±0.08 | ≤3.5 | 0.60±0.05 |
φ8.0 | 8.5±0.3 | 0.30±0.08 | ≤4.0 | 0.60±0.08 |
φ9.0 | 9.5±0.4 | 0.30±0.08 | ≤4.5 | 0.60±0.08 |
φ10 | 10.5±0.5 | 0.30±0.08 | ≤5.0 | 0.60±0.08 |
φ11 | 11.5±0.5 | 0.30±0.08 | ≤5.5 | 0.60±0.08 |
φ12 | 12.5±0.5 | 0.30±0.08 | ≤6.0 | 0.60±0.08 |
φ13 | 13.5±0.5 | 0.36±0.12 | ≤6.5 | 0.65±0.12 |
φ14 | 14.5±0.5 | 0.36±0.12 | ≤7.0 | 0.65±0.12 |
φ15 | 15.5±0.5 | 0.36±0.12 | ≤7.5 | 0.65±0.12 |
φ16 | 16.5±0.5 | 0.36±0.12 | ≤8.0 | 0.70±0.12 |
φ17 | 17.5±0.5 | 0.36±0.12 | ≤8.5 | 0.70±0.12 |
φ18 | 18.7±0.5 | 0.40±0.15 | ≤9.0 | 0.75±0.12 |
φ20 | 20.6±0.6 | 0.40±0.15 | ≤10.0 | 0.80±0.12 |
φ22 | 22.7±0.6 | 0.40±0.15 | ≤11.0 | 0.80±0.12 |
φ25 | 25.5±0.7 | 0.45±0.15 | ≤12.5 | 0.90±0.12 |
Other sizes are available upon special order.
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Halogen Fredd Heat Shrink Tubing : 2:1 CB-HFT
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Heat Shrink Yellow/ Green Tubing : 2:1 CB-HFT(Y/G)
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Heat Shrink Tubing : 3:1 CB-HFT(3X)
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Thin Wall Heat Shrink Tubing : 4:1 CB-HFT(4X)
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Military Heat Shrink Tubing : CB-HFT(1000)
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Wire Management Heat Shrink Tubing : CB-HFT(TM)
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Non Flam-retardant Heat Shrink Tubing : Changbao 101
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Semi-regid Heat Shrink Tubing : Changbao 301
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> PET Heat Shrink Tubing : CB-PET
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Low Shrink Temperature Heat Shrink Tubing : CB-HFT(LS)
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Temperature Resistance Heat Shrink Tubing : CB-HRT
- Home -> Thin Wall Heat Shrink Tubing Manufacturer -> Heat Shrinkable Tubing : CB-HFT(300)
